I believe that everyone has a certain understanding of drip irrigation through the previous introduction. Now many places will choose to use this equipment when watering. After using this equipment, it not only saves water, but also is very convenient, which saves both labor and energy. However, in order to use the device to exert the corresponding use effect, it is necessary to pay attention to the following operating conditions, so that the device will not have problems during use.

1. The drip irrigation tape needs to be used at an ambient temperature greater than 0 °C.

2. The drip irrigation water needs to be filtered through a filter of more than 120 meshes.

3. During the drip irrigation operation, it is necessary to slowly open the main water supply switch and gradually reach the rated working pressure to avoid the damage to the drip irrigation system caused by the instantaneous high pressure caused by the sudden opening of the valve.

4. When the drip irrigation tape is laid, the convex surface of the labyrinth runner should face upwards.

5. The shearing equipment should be sheared vertically, and the shearing position should be between the two flow channels.

6. The equipment is used on the ground and must not be buried underground.

The above are the conditions of use of the drip irrigation belt when it is running. In order to prevent problems during the use of the equipment, everyone must have a certain understanding of the above content before using it, so as to ensure that the operation will not be affected by the conditions. The reason is that the equipment has problems and failures during use, which not only delays the normal work progress but also causes certain damage to the equipment, so the gains outweigh the losses. In addition, pay more attention to the above conditions of use.