Nowadays, in order to reduce the workload, many agricultural irrigation belts have gradually begun to use drip irrigation tapes slowly. However, they often encounter burns during the use process, which damages the surface of the equipment and causes water leakage, which in turn leads to the inability to use it normally. So when we use it, we can take some precautions against burns. What are the prevention methods?

1. When laying the drip irrigation belt, the product can be buried to avoid focus burns.

2. Before the crops are planted, the land should be leveled to reduce the phenomenon of many pits and depressions on the land. In order to prevent the clods, rocks and weeds from holding up the mulch, causing water vapor to accumulate under the mulch to form a lens effect and burn the product.

3. Use special mulch or colored mulch for drip irrigation to block the penetration of sunlight.

4. While laying the drip irrigation tape, press and compact the film, so that the film is as close to the product as possible, and there should be no space between the film and the product. Avoid focusing of sunlight through water droplets.

The above is the method to prevent the burn of the dropper tape. If there is a burn problem in the future use, we can take effective preventive methods according to the cause of the burn. The product burn will cause its surface to be damaged and affect the normal Use, we can leave some water in the product after use to reduce the phenomenon of burns.